Skip to content
Menu Close

Application

E-commerce distribution centers: end-to-end material handling

An e-commerce distribution center receives goods from the manufacturer or distributor and ships them to the end customer in single-item or multi-item orders, always against a strict cutoff time. Its material handling system brings together everything from telescopic conveyors for unloading, transport lines, sorters and mobile robotics to the software (WCS/WES) that synchronizes each stage: picking, consolidation, packing and on-time shipping. At Kairos we design, integrate, retrofit or extend it without stopping your operation.

Request a site survey Let’s talk

What material handling system does an e-commerce distribution center use?

In an e-commerce distribution center, the material flow starts at receiving and moves through six key stages: receiving, storage, picking, consolidation, packing and shipping. For each one there is a technology that best fits the product profile and the building’s volume: racks and automated systems store the load, conveyors move boxes and totes in a continuous flow, sorters sort or consolidate according to the order type, and the control software orchestrates which tasks run at each moment.

Stage What happens Technology
Receiving Product arrives from the manufacturer or distributor in boxes or on pallets; it is checked, logged and received into the warehouse. Telescopic belt conveyor (for floor-loaded unloading), roller conveyor or accumulation lines for pallets and boxes.
Storage Goods are stored and placed in their assigned location (put away). Selective rack, mobile shelving, AS/RS or autonomous forklifts (AMR / AGV / AGF).
Picking Order preparation (picking): taking individual items to build each order. AMRs in goods-to-person (GTP) setups or pick tunnels with conveyors for totes and boxes.
Consolidation Regrouping items from different locations that belong to the same order, in multi-line orders. 3D sorter, dynamic put walls or a recirculation loop on a conveyor with diverters.
Packing The product is packed in its final bag, envelope or box; the weight is checked and the shipping label applied. Ergonomic packing tables, slider bed belt conveyors for bags and envelopes, in-motion weighing and automatic print & apply labeling.
Shipping Final sortation of the closed parcel to its chute, carrier or assigned last-mile route. Cross-belt sorter, sliding shoe sorter or roller or pop-up sorter, depending on the mix of envelopes and boxes.
Warehouse and distribution center processes, from arrival to shipping A walk through a warehouse or distribution center in fourteen processes. On the left, in a column from top to bottom, the main flow: pre-advice, receiving, checking, put-away, storage, picking, packing, sorting and shipping. On the right, the processes that feed it, support it or leave it: customer returns enter at checking; cross-docking leaves after checking and rejoins at sorting without going through storage; inventory control goes with storage; replenishment moves stock from storage to the picking locations; and value-added services sit between picking and packing. In the animation, a black square, the goods, moves through the flow, and a filled circle marks the information processes; below, a panel says what happens in each process (the same detail is in the list below the drawing) and a dimension line measures progress. At the end, the Kairos logo: designs and integrates the material handling system: conveyors, mobile robotics, sorters, storage and WCS and WES software. Pre-adviceReceivingCheckingPut-awayStoragePickingPackingSortingShippingReturnsCross-dockingInventorycontrolReplenishmentValue-addedservices
  1. Pre-advice (ASN): the supplier says what is arriving and when; dock and crew are planned from it.
  2. Receiving: goods are unloaded and recorded.
  3. Checking: what arrived is compared against the pre-advice (quantity, condition and label).
  4. Returns: what customers send back is inspected before going back to stock.
  5. Cross-docking: goods move from the inbound to the outbound dock without being stored, within hours.
  6. Put-away: each pallet travels to its location.
  7. Storage: goods are stored high, with access to every pallet.
  8. Inventory control: counts and locations kept current, so you know what is where.
  9. Replenishment: pick locations are refilled before they run empty.
  10. Picking: the items of each order are picked.
  11. Value-added services: labeling, kitting or repacking, as the customer requires.
  12. Packing: orders are packed, weighed and labeled.
  13. Sorting: each case is split by route, store or dock.
  14. Shipping: each order leaves on its truck, in loading order.

All of this is coordinated from the top control layer, where the WES / WCS software runs: the platform that turns your WMS orders into physical decisions in real time, balancing the flow of boxes, assigning stations and coordinating which task each piece of equipment runs without overloading the line.

How is order picking done (picking and packing)?

Order picking and preparation in e-commerce can be organized under different operating schemes, from conventional, mechanically assisted methods to high-density robotic cells. The choice of strategy depends on the order profile (single-item or multi-item), inventory turnover (ABC analysis) and SKU density in the building:

Method How it works When it fits
Person to goods
(PTG)
The operator walks the aisles taking items from their locations and places them in a tote or on a pallet, assisted by RF terminals or pick-to-voice. Catalogs with fewer SKUs, fast-moving products (high A concentration) or early stages of operation where capital investment must be kept in check.
Zone picking
(pick-and-pass)
The building is split into operating areas; each picker covers a fixed zone and totes move from one zone to the next on a conveyor trunk line as order lines are completed. Mid- to large-scale distribution centers, multi-line orders with items spread across the building and operations looking to sharply cut staff travel.
Goods to person
(GTP)
The whole inventory unit or container travels automatically to the operator’s fixed station on autonomous mobile robots (AMR), miniload AS/RS or shuttles; the picker stays at an ergonomic station. Long-tail catalogs with widely spread SKUs, orders with few items each, limited floor space and buildings that aim to maximize picking speed without operator fatigue.

How does an e-commerce distribution center prepare for peak season?

Preparing for peak seasons (such as Hot Sale or Buen Fin in Mexico) isn’t improvised at the last minute: adding shifts or temporary staff is no longer enough if the physical line saturates. Preparation starts 8 to 12 weeks before the peak, auditing historical volume and the real bottlenecks that put the previous cutoff time at risk. Based on that data, you evaluate whether the operation needs extended lines, modular diverts or bypasses, a reconfigured layout or major maintenance with critical spare parts on hand. During the operating peak there is no window to improvise.

  1. Reliability audit and bottleneck measurement (8 to 12 weeks ahead). Analyze last peak’s data to locate the bottlenecks: dock unloading, singulation at induction, accumulation at packing or sorter chutes. An external site survey helps find hidden wear in critical components before they fail under maximum load.
  2. Modular extension or reinforcement lines. Extending the line before peak season with MDR roller or belt conveyor modules, temporary packing stations or bypass branches to decouple congested zones without stopping daily operations.
  3. Layout adjustments and a dry run (practice peak). Relocating and modifying conveyors in scheduled phases to remove unnecessary crossings. Validate system balance by running a flow test weeks before the season to tune speeds and response times.
  4. Major maintenance and critical spare parts. Preventive maintenance of conveyors and sorters (lubrication, belt tracking, replacing worn bearings and updating sensors and control cards). Keep a strategic stock of critical parts on site so you don’t depend on lead times during a contingency.
  5. Contingency protocols and technical support with an agreed response time. Set up alternative manual flow routes or a mechanical bypass in case of an electrical failure or sorter saturation, backed by technical support (on site or remote) dedicated to the operation.

What is evaluated before working on an e-commerce distribution center’s operation?

Before modifying or integrating a system in a running building, we evaluate actual demand, the layout and the existing architecture through a site survey:

  • Demand behavior: order volume on a regular day and at peak season, plus the ratio of single-item to multi-item orders.
  • Packaging profile: mix of corrugated boxes, plastic bags and envelopes, with their weights and dimensions, to define the transport and sortation technology.
  • Inventory turnover: number of active SKUs and their ABC turnover, to optimize travel and balance the picking zones.
  • Reverse logistics: the flow of returns and inspection, to put product back into stock without overwhelming the receiving and shipping lines.
  • Cutoff times and authorized shutdowns: carriers’ pickup deadlines and the real shutdown window available to carry out the work on site.

Full methodology: what is evaluated in a Kairos site survey.

What Kairos does in e-commerce

  • Design and integration of new systems: we develop and implement complete material handling systems for new distribution centers or for added installed capacity: new projects.
  • Work on and rearrangement of running lines: we modify, relocate and extend existing lines whatever the brand, carrying out the work in scheduled phases with strictly controlled shutdown windows.
  • Maintenance and spare parts supply: we provide preventive and corrective service for conveyors and sorters of different brands, and supply critical spare parts and consumables to keep your operation running.

Frequently asked questions

Frequently asked questions

Does Kairos offer fulfillment?

No. Kairos doesn’t run warehouses or pick orders for others: it designs and integrates the system your team or your logistics provider uses to pick, pack and ship.

What are the stages of order picking?

Releasing the order, getting to the goods (or bringing them to the station), picking and confirming each item, and consolidating the order for packing. Which stage to automate first depends on where the most time is lost, and that is measured.

Can picking be automated without stopping operations?

Yes, in phases: the new zone is built next to the one running, tested with real orders at low-volume hours, and the switch is made section by section, on weekends or at night if needed.

Robots or conveyors to move totes?

Conveyors when the route is fixed and the tote flow is high and steady; AMRs when the layout will change, the flow rises by season or aisles are shared with people. They can be combined.

Can’t the operation wait?

Tell us what equipment you have, where it is and what your window is. We reply within one business day.

Hours: Monday to Friday, 9:00 to 17:00 (Monterrey time)